Agriculture trade data by HS code

List of catalogs in this article:

• 1, How to renovate car headlights
• 2, Car headlights turn yellow? Don't worry, five steps to teach you manual renovation
• 3
  、 How are the car headlights refurbished?

How to renovate car headlights

1. Remove dust and stains on the surface of the headlights; cover the edge with adhesive tape in the area around the headlights that does not need to be renovated; use water sanding paper to sand; after polishing Remove the powder, then dip the polishing wax with a rag and polish it in a circle.

2. Headlight paint spraying renovation method: that is, the UV paint is sandblasted on the surface of the car lamp, and the headlight spray paint renovation method is carried out through UV lamp or sunlight. Headlight polishing and renovation method: After sanding with sandpaper, use coarse and medium coarse wax to polish in order. Headlight polishing and renovation: specially processed and matched.

3. The second owner can use the headlight repair liquid to renovate the headlight lampshade of the vehicle. When using the headlight repair liquid, the headlight lampshade of the vehicle needs to be wiped clean in advance, and then the headlight repair liquid is sprayed on the safety headlight lampshade of the vehicle. After the surface of the headlight is air-dried, use a rag to wipe it again. The headlights of the vehicle can be renewed.

4. The easiest way to renovate the headlight: the lampshade is easy to turn yellow and accumulate stains after a long time. It is effective to clean it with toothpaste, because toothpaste contains abrasives.Touch the headlight with UV paint, and then bake it dry with an ultraviolet lamp. Use sandpaper to polish the headlights, and then polish them with special wax.

5. The renovation methods for yellowing car headlights are: wash the headlights with soapy water, sand and polish the surface of the lamp. Wash the headlights with soapy water: Let this method be applied to lampshades with low oxidation of car lights. Every two months, cut a small piece of laundry soap or soap at home and turn it into soapy water to wash the headlights.

Car headlights turn yellow? Don't worry, five steps to teach you manual renovation

1. The first step: scrub clean and remove the dust and dirt on the surface. There will be a polish or wax layer in our daily car wash. The first step is to wipe these clean.

2. How to deal with yellowing of car headlights: The most direct and effective way is to polish the surface of the lampshade of car headlights, which can be sanded with water sandpaper. After polishing, it is enough to apply special polishing wax for cars. Use toothpaste to solve the problem of yellowing car headlights.

3. If the headlight shade of the car turns yellow, the most economical way is to use soapy water to clean it, because the soapy water is weakly alkaline and not corrosive. At the same time, it also has a strong cleaning ability, which can effectively restore the luster of the headlights.

4. How to deal with yellowing of car headlights: polish the surface of the lampshade of car headlights; use toothpaste to solve the problem of yellowing of car headlights; use soapy water for cleaning. Soapy water is weakly alkaline, which can not only renovate the headlights, but also not damage the headlights; send the car to the car repair shop. Renovation and repair of headlights.

5. Exquisite renovation. This method is relatively common, and it can be used in ordinary car beauty shops. In fact, the principle is like the paint of the car body. The headlights are sanded with sandpaper, and then polished with special wax. The effect of this renovation method is obvious, but the disadvantage is also obvious, that is, it can't be thrown everywhere, and the protective film is also worn off after polishing.

6. Car headlights mainly play the role of lighting, which is generally very bright. Generally speaking, the headlight change is actually that the lampshade on the surface of the headlight is oxidized, affecting the light transmission, so it looks yellow.

How to renovate car headlights when they turn yellow

1. The renovation methods for car headlights yellow include headlight spray paint renovation method, large Lamp polishing and renovation method, headlight polishing and renovation. Headlight spray paint renovation method: that is, the UV paint is sandblasted on the surface of the headlight, and the headlight spray paint renovation method is carried out through UV lamps or sunlight.

2. The renovation method of yellowing car headlights is as follows: scrub clean. In order to remove dust and dirt from the surface, we will have a polish or wax layer when washing the car daily. The first step is to erase these. Seal and cover the edge. Go to the supermarket to buy some low-viscosity and easy-to-peel blue tape to cover the edge area of the headlight.

3. Headlight polishing renovation method: the surface of the lamp is polished, and then the coarse wax and medium coarse wax are polished in turn, after special processing and mixing. Headlight polishing and renovation is a commonly used method, because this repair method is fast and convenient.

How to do the specific steps for car headlight renovation

Remove dust and stains on the surface of the headlights; cover the edge with adhesive tape in the area around the headlights that does not need to be renovated; use water frosted paper to sand; remove powder after sanding At the end, then dip the polishing wax with a rag and polish it in a circle.

The steps are as follows: remove the headlights and remove oil stains, sweat stains and wax (silicon) on the surface of the lamp and around it. Wipe as large as possible;Sand, check the degree of damage to the headlight (choose different models of sandpaper according to the depth of the scratch); it will show that the polishing is smooth and clear.

Inspection: First of all, check the scope of repair to determine the material of the headlight, and secondly, you need to know the type of repair, such as yellowing, cracking, blurring and scratches.

Simple method of headlight renovation

1. Fumigation renovation. In fact, it is to add a protective film to the headlight shade of the car. The method is to stick a seal on the edge of the lampshade, then polish it one by one with sandpaper of vary thickness, and finally apply the protective mask with professional tools.

2. The owner of the car can use the headlight repair solution to renovate the headlight shade of the vehicle. When using the headlight repair solution, it needs to be in advanceWipe the headlightshade of the vehicle clean, and then spray the headlight repair solution on the safety headlightshade of the vehicle. After the surface of the headlights is air-dried, wipe it again with a rag, and the headlights of the vehicle will be renewed.

3. The method of spray-painted renovation is very simple, but it is unlikely that the car owner will operate it by himself, because it needs to be touched on the headlights with UV paint, and then dried with ultraviolet lamps. This renovation is very particular, and it is easy to "relapse". 2 The method of polishing renovation is relatively common. Generally, cars are beautiful Rongdian can do it in fact.

4. Headlight polishing and renovation is a common method, because this repair method is fast and convenient. Headlight fumigation repair renovation method: It is to re-coat a new protective film on the headlights.

How to renovate the car headlights?

1. Polishing and renovation. For some fine scratches and cracks on the headlights of the vehicle, you can use a category of sanding paper to sand, and then apply polishing wax to polish. The basic principle is like car paint polishing.

2. You can find a repair shop nearby with some maintenance experience to polish the surface of the headlight shell. When the lampshade is aging, we can deal with it in the following way: use patterned paper to paste the periphery of the lampshade to avoid damaging the surrounding paint when sanding and polishing. It is better to use a wider patterned paper.

3. Spray-painted renovation. This method is very simple, but it is unlikely that the owner will operate it by himself, because UV paint will be used to touch the headlights, and then dried with ultraviolet lamps. This kind of renovation is very particular about the technique, and it is easy to "relapse".Polished renovation. This method is relatively common, and ordinary car beauty shops can do it.

4. The owner can use silicon-containing toothpaste to renovate the car headlights, squeeze the toothpaste on the headlight lampshade, and use a special car rag or a softer rag to test the headlight hood in a clockwise manner. It takes about 35 minutes to wipe the headlight on one side, and the wiping time in the key area can be extended. , after wiping, clean the headlights with water.