1. First, the accessories, and second, the oil route is not clean, carbon accumulates, and the piston ring is stuck. It is recommended that you confirm the reason for burning engine oil first, so as to solve it in a targeted manner. First of all, check the accessories, mainly the valve chamber cover and the exhaust valve. They are one. When checking, just check together.
2. Therefore, to solve the problem, we must start from the root oil road to the root.
3. Finally, confirm that it is burning engine oil. 4S proposed two plans, one is to overhaul the engine and replace the piston ring, which is about 8,000 yuan. The second is the change valve oil seal, which is about 1700.
4. If you don't clean the oil route for a long time or don't clean the oil line effectively, you can use detergents at will. Using detergents and using effective cleaners are two different things;The antifreeze replacement cycle is too long or not replaced at all; the oil replacement cycle is too long; long-term or frequent short-distance driving.
1. [Pacific Automobile Network] The reason why the engine shakes after cleaning the throttle valve of Peugeot 4008: the inlet motor is damaged;The air intake control function of the throttle valve fails. The throttle valve is a controllable valve that controls the air entering the engine. After the gas enters the intake pipe, it will be mixed with gasoline into a combustible mixture, thus burning and doing work.
2. Causes for the shaking of the car: too much carbon accumulation. If the carbon accumulation in the engine cylinder is serious, it will cause spark plug blockage and valve blockage, which directly leads to the shaking of the car when idling. If the acceleration ability of the car is not as good as before and the shaking is very long-lasting, you can consider cleaning the inside of the engine cylinder.
3. According to your description, it must be abnormal. When the car is started normally, the idling speed is smooth and there should be no shaking. Then it is suggested to check it. Spark plugs. Whether the fuel injector and throttle valve are dirty, it is recommended to clean the throttle valve.
4. And it flows out along the exhaust pipe. Especially in winter, the external environment in winter is relatively cold and the air humidity is high. After the car is running, the temperature difference inside and outside the engine is large, and it is more likely to drip water from the exhaust pipe of the car. When many car owners encounter a lot of water dripping from the car exhaust pipe, they may also see white smoke from the exhaust pipe.
It is turbocharged. The whole series of this car uses turbocharged engines. 4008 is a compact SUV under Peugeot. This car uses two engines, one is a 6-liter turbocharged engine and the other is an 8-liter turbocharged engine.
Peugeot 4008 uses a turbocharged engine. This car uses two engines, one is a low-power version of the 6-liter turbocharged engine, and the other is a high-power version of the 6-liter turbocharged engine.
Peugeot 4008 is a compact turbocharged SUV. The car adopts two engines, namely 6-liter and 8-liter turbocharged engines. The length, width and height of the body are 4510 mm (mm), 1850 mm (mm) and 1628 mm (mm) respectively, and the wheelbase is 2730 mm (mm).
Peugeot 4008 is equipped with a 6-speed manual transmission and a CVT stepless transmission, which is light and comfortable to operate. Strong chassis, excellent passability and stability;Comfortable suspension, wide vision, netizens said, "The control is good, the rearview mirror is quite large, and the reversing is very sensible.
The logo 4008 has a fashionable and beautiful appearance, and the fashionable dynamic interior is simple and practical. The configuration is good, the space is spacious enough, the power is sufficient, the control is comfortable and the sound insulation is also well controlled. The Peugeot 4008 is relatively good in terms of noise. When the idle speed is 60Kmh and 90kmh, the Peugeot 4008's The noise control is quite good, and you can't hear it.
There is only one question about the engine complaint. Judging from the data, the engine quality of Peugeot 4008 is still quite reliable. Although there is basically no quality problem, some car owners report that the power is very weak at the start.
Peugeot 4008 is a combination located in the mid-end market.Although the price of the compact SUV is relatively expensive, it has very good performance. Peugeot 4008, which has a high market sales, is most satisfied by its fashionable and dynamic appearance. Although the interior style is simple, the functional configuration is comprehensive and the two engines carried by Peugeot 4008 are powerful and oil.
Peugeot 4008 is a medium-sized car. It integrates Peugeot's latest technology and has a very forward-looking design to bring a comfortable experience. Peugeot 4008 adopts a 6L engine and a 6-speed manual automatic transmission, which is full of power and accelerates faster, providing better fuel consumption and higher fuel economy.
Unique design, full of distinctive personality expression. In the environment of design convergence, Dongfeng Peugeot, as a representative of French cars, is obviously a special existence.Its design style has a distinct family-oriented personality language. 4008 is a masterpiece.
The three major parts of Peugeot 4008 refer to the engine, gearbox and chassis. The powerful chassis of Mitsubishi ASX is solid, and the engine is a product jointly developed by Peugeot Automobile Company and BMW Automobile, with mature technology. The three parts are of reliable quality and generous workmanship. It is a very good car.
Peugeot 4008 is originally imported, and the manufacturer is: Nagoya Manufacturing Co., Ltd. of Mitsubishi Co., Ltd. of Japan. There are also two sister models in China: Citroen's C4 across and Mitsubishi's ASX. Among them, 4008 and C4 are imported, and ASX is domestic.
1. [Pacific Automobile Network] The reason for the abnormal noise of Peugeot 4008 starting engine refueling: engine explosion; lack of engine oil; engine oil pressure is too low; friction between the valve and the condit and the hydraulic rod; the piston does not reach the upper stop point when compressing the stroke, sparks The plug did not ignite and the gasoline exploded in advance.
2. The engine carbon accumulation is serious. The most common cause of idling jitter is excessive carbonisation of the throttle valve or fuel nozzle.
3. The specific reasons for the abnormal noise of the engine are as follows: abnormal noise from cold start; many car owners will hear the abnormal sound of "dada" from the engine compartment when the car is cold start. In fact, this abnormal sound of "dada" is caused by the oil pump not fully establishing the oil pressure during cold start, resulting in the lubrication of various parts.
4. There is too much carbon inside the engine or the fuel use is not qualified.Clean the accumulated carbon and replace the fuel. X0dx0a valve abnormal sound. Especially after the cold car starts, the valve will make a "da-da" sound, and then the hot car will be fine, because the oil precipitates in the oil sane shell, and the engine is not "pressed" in time when the engine starts.
Processed foods HS code mapping-APP, download it now, new users will receive a novice gift pack.
1. First, the accessories, and second, the oil route is not clean, carbon accumulates, and the piston ring is stuck. It is recommended that you confirm the reason for burning engine oil first, so as to solve it in a targeted manner. First of all, check the accessories, mainly the valve chamber cover and the exhaust valve. They are one. When checking, just check together.
2. Therefore, to solve the problem, we must start from the root oil road to the root.
3. Finally, confirm that it is burning engine oil. 4S proposed two plans, one is to overhaul the engine and replace the piston ring, which is about 8,000 yuan. The second is the change valve oil seal, which is about 1700.
4. If you don't clean the oil route for a long time or don't clean the oil line effectively, you can use detergents at will. Using detergents and using effective cleaners are two different things;The antifreeze replacement cycle is too long or not replaced at all; the oil replacement cycle is too long; long-term or frequent short-distance driving.
1. [Pacific Automobile Network] The reason why the engine shakes after cleaning the throttle valve of Peugeot 4008: the inlet motor is damaged;The air intake control function of the throttle valve fails. The throttle valve is a controllable valve that controls the air entering the engine. After the gas enters the intake pipe, it will be mixed with gasoline into a combustible mixture, thus burning and doing work.
2. Causes for the shaking of the car: too much carbon accumulation. If the carbon accumulation in the engine cylinder is serious, it will cause spark plug blockage and valve blockage, which directly leads to the shaking of the car when idling. If the acceleration ability of the car is not as good as before and the shaking is very long-lasting, you can consider cleaning the inside of the engine cylinder.
3. According to your description, it must be abnormal. When the car is started normally, the idling speed is smooth and there should be no shaking. Then it is suggested to check it. Spark plugs. Whether the fuel injector and throttle valve are dirty, it is recommended to clean the throttle valve.
4. And it flows out along the exhaust pipe. Especially in winter, the external environment in winter is relatively cold and the air humidity is high. After the car is running, the temperature difference inside and outside the engine is large, and it is more likely to drip water from the exhaust pipe of the car. When many car owners encounter a lot of water dripping from the car exhaust pipe, they may also see white smoke from the exhaust pipe.
It is turbocharged. The whole series of this car uses turbocharged engines. 4008 is a compact SUV under Peugeot. This car uses two engines, one is a 6-liter turbocharged engine and the other is an 8-liter turbocharged engine.
Peugeot 4008 uses a turbocharged engine. This car uses two engines, one is a low-power version of the 6-liter turbocharged engine, and the other is a high-power version of the 6-liter turbocharged engine.
Peugeot 4008 is a compact turbocharged SUV. The car adopts two engines, namely 6-liter and 8-liter turbocharged engines. The length, width and height of the body are 4510 mm (mm), 1850 mm (mm) and 1628 mm (mm) respectively, and the wheelbase is 2730 mm (mm).
Peugeot 4008 is equipped with a 6-speed manual transmission and a CVT stepless transmission, which is light and comfortable to operate. Strong chassis, excellent passability and stability;Comfortable suspension, wide vision, netizens said, "The control is good, the rearview mirror is quite large, and the reversing is very sensible.
The logo 4008 has a fashionable and beautiful appearance, and the fashionable dynamic interior is simple and practical. The configuration is good, the space is spacious enough, the power is sufficient, the control is comfortable and the sound insulation is also well controlled. The Peugeot 4008 is relatively good in terms of noise. When the idle speed is 60Kmh and 90kmh, the Peugeot 4008's The noise control is quite good, and you can't hear it.
There is only one question about the engine complaint. Judging from the data, the engine quality of Peugeot 4008 is still quite reliable. Although there is basically no quality problem, some car owners report that the power is very weak at the start.
Peugeot 4008 is a combination located in the mid-end market.Although the price of the compact SUV is relatively expensive, it has very good performance. Peugeot 4008, which has a high market sales, is most satisfied by its fashionable and dynamic appearance. Although the interior style is simple, the functional configuration is comprehensive and the two engines carried by Peugeot 4008 are powerful and oil.
Peugeot 4008 is a medium-sized car. It integrates Peugeot's latest technology and has a very forward-looking design to bring a comfortable experience. Peugeot 4008 adopts a 6L engine and a 6-speed manual automatic transmission, which is full of power and accelerates faster, providing better fuel consumption and higher fuel economy.
Unique design, full of distinctive personality expression. In the environment of design convergence, Dongfeng Peugeot, as a representative of French cars, is obviously a special existence.Its design style has a distinct family-oriented personality language. 4008 is a masterpiece.
The three major parts of Peugeot 4008 refer to the engine, gearbox and chassis. The powerful chassis of Mitsubishi ASX is solid, and the engine is a product jointly developed by Peugeot Automobile Company and BMW Automobile, with mature technology. The three parts are of reliable quality and generous workmanship. It is a very good car.
Peugeot 4008 is originally imported, and the manufacturer is: Nagoya Manufacturing Co., Ltd. of Mitsubishi Co., Ltd. of Japan. There are also two sister models in China: Citroen's C4 across and Mitsubishi's ASX. Among them, 4008 and C4 are imported, and ASX is domestic.
1. [Pacific Automobile Network] The reason for the abnormal noise of Peugeot 4008 starting engine refueling: engine explosion; lack of engine oil; engine oil pressure is too low; friction between the valve and the condit and the hydraulic rod; the piston does not reach the upper stop point when compressing the stroke, sparks The plug did not ignite and the gasoline exploded in advance.
2. The engine carbon accumulation is serious. The most common cause of idling jitter is excessive carbonisation of the throttle valve or fuel nozzle.
3. The specific reasons for the abnormal noise of the engine are as follows: abnormal noise from cold start; many car owners will hear the abnormal sound of "dada" from the engine compartment when the car is cold start. In fact, this abnormal sound of "dada" is caused by the oil pump not fully establishing the oil pressure during cold start, resulting in the lubrication of various parts.
4. There is too much carbon inside the engine or the fuel use is not qualified.Clean the accumulated carbon and replace the fuel. X0dx0a valve abnormal sound. Especially after the cold car starts, the valve will make a "da-da" sound, and then the hot car will be fine, because the oil precipitates in the oil sane shell, and the engine is not "pressed" in time when the engine starts.
Trade data-driven transport mode selection
author: 2024-12-24 00:52Trade data-driven supply chain optimization
author: 2024-12-24 00:03Sourcing opportunities filtered by HS code
author: 2024-12-24 00:00Real-time freight capacity insights
author: 2024-12-23 23:30Real-time customs clearance alerts
author: 2024-12-24 01:11Plastics (HS code ) import analysis
author: 2024-12-24 00:32Raw silk HS code identification
author: 2024-12-23 23:07Raw materials HS code intelligence
author: 2024-12-23 22:56HS code alignment with import quotas
author: 2024-12-23 22:45654.55MB
Check462.74MB
Check139.48MB
Check116.32MB
Check713.69MB
Check549.67MB
Check626.37MB
Check579.48MB
Check786.18MB
Check555.24MB
Check568.33MB
Check435.43MB
Check751.86MB
Check913.86MB
Check122.16MB
Check351.76MB
Check335.59MB
Check518.59MB
Check711.73MB
Check231.87MB
Check987.81MB
Check143.17MB
Check656.33MB
Check813.65MB
Check418.91MB
Check925.23MB
Check286.62MB
Check321.95MB
Check983.26MB
Check248.82MB
Check222.51MB
Check457.31MB
Check176.76MB
Check374.55MB
Check895.31MB
Check547.88MB
CheckScan to install
Processed foods HS code mapping to discover more
Netizen comments More
820 Sustainable sourcing via HS code tracking
2024-12-24 01:04 recommend
624 Data-driven tariff engineering via HS codes
2024-12-24 00:52 recommend
2033 HS code correlation with global standards
2024-12-23 23:27 recommend
2266 Global trade metadata enrichment
2024-12-23 23:18 recommend
560 Renewable energy equipment HS code mapping
2024-12-23 23:18 recommend