How to build a resilient supply chain

List of contents in this article:

• 1,How to build a resilient supply chainHow to operate the front windshield
• 2, Do you need to put a film on the windshield?
• 3, Is the depreciation of the front glass car big
• 4, What are the small black dots and black edges on the front glass for
• 5, What is the front gear of the car?

How to change the front windshield

The process of replacing the front windshield of the car: 1. First, slowly remove the black protective strip around the windshield with a screwdriver, and then remove the rain scraper and the protective cover under the front windshield; pass the steel wire through the sealant under the windshield. One is in the car and one is outside.

First, remove the water stop strip around the original windshield, and then remove the original windshield. Finally, clean up the original base layer and install a new windshield, and then install the original water stop strip. The overall process takes about an hour.

If you want to replace the windshield of the car by yourself, we need the following materials: a knife, a Phillips screwdriver, pliers, transparent tape and glue.

The prompt message knows that the baby can't find the problem_!The problem may have been invalidated.

Do you need to put a film on the windshield?

The front windshield of the car also needs to be filmed. The use of car film: heat insulation and sun protection, and the film can block the heat generated by infrared rays. Ultraviolet isolation, the medium and long waves in ultraviolet rays can penetrate very thick glass, and the thermal insulation film can cut off most of the ultraviolet rays.

Because the front windshield of the car is a tempered safety glass, when the glass bursts, if the front shield is attached, the debris will not splash, which plays a role in protecting the safety of the driver. When buying a front windshield film, it is very important to consider the brand. At present, explosion-proof films such as Quantum and 3M are good choices.

Does the front windshield of the car need a film? There are several types of film, which are generally applied to the whole vehicle film. The whole car film includes front window film, side glass film and rear glass film, except for the sunroof. If there is a sunroof, extra money is required. Countless riders have given different views and opinions on whether the front windshield of the car should be pasted.

Is the depreciation of the front glass car great

1. Replacing the front windshield will have a certain depreciation. After all, it is not the original factory. Is the depreciation of the car with the front windshield? In fact, don't worry too much. The windshield of the car is a wearable part. Although the value of the vehicle will be slightly depreciated compared with before replacement when the vehicle is resold, which is also normal, but the overall impact is not very big.

2. If the front windshield is replaced, the value of the vehicle will be slightly depreciated when it is resold than before the replacement, but the overall impact is not very big. The impact of replacing the front windshield: the front windshield needs to be re-applyed with solar film, which is expensive and time-consuming.

3. Although the vehicle will be slightly depreciated when resold, which is normal, the overall impact is small. However, the windshield needs to be replaced correctly. If the installation is not standardized, there will be some hidden dangers, which will have a certain impact on the value of the car.

What are the small black dots and black edges on the front glass used for

Black dots make the glass more transparent. Black dots make the glass clearer, and the front windshield is easy to deform during processing. Black dots can keep the glass evenly heated and make the front windshield look clearer. The front windshield is tempered and then bent in a high-temperature environment such as 280-350℃.

Generally speaking, there will be some dots and black edges on the front glass of everyone's car. In fact, such black dots and black edges have a certain role. It can make the glass clearer, and also make everyone's glass more durable, and it can also play the effect of protecting the eyes.

Therefore, this can make the front windshield more durable.Small black dots can protect the driver's eyes. The position and area of some small black dots on the car are not randomly designed, but their area and position have been precisely calculated and designed by the glass manufacturer.

What is the front gear of the car?

D gear is a forward gear: a gear that is often used in automatic transmission models. Generally, in the process of driving the vehicle, the gear is in the D gear position, so as to ensure that the vehicle can move forward normally. S gear is a sports mode, which is generally used for off-road, acceleration or overtaking.

The forward gear of the automatic car is D, and the rear gear is R; the forward gear of the manual car is divided into 6, the rear gear is R, and some models do not have 6 gears.

The windshield of the car is laminated glass.Laminated glass refers to a transparent adhesive plastic film pasted between two or three layers of glass, combining the toughness of plastic and the hardness of glass to increase the breakage resistance of glass.

The two large pieces of glass in the front and rear of the vehicle are the front windshield and the rear windshield, and the small pieces on the left and right are the window glass.

The common front windshield of home cars is laminated glass, that is, double glazing.

The front windshield of the car has single layers and double layers. Because the advantage of laminated glass is that there will be no flying fragments after the glass is hit. Because the intermediate sandwich has an adhesive link, even if the glass is broken, it will still be connected under the action of adhesive, thus ensuring the safety of drivers and passengers.