D's full English name is drive, which represents the forward gear. When the gear is in this position, the car can move forward. At the same time, the automatic transmission under the gear will automatically change gear according to the speed and throttle, instead of stepping on the clutch like a handcar, which is much simpler and more convenient to operate. Generally, this gear is used for normal driving.
N gear is idle, which is used when the vehicle is stopped. R gear is a reverse gear, and you can only enter this gear when the car is completely stationary. P gear is a parking gear, which is used when the engine is turned off or the car is stationary. S is the second gear, which strengthens the power and enters the sports mode.
The letters on the gear of automatic transmission cars are P, R, N, D, S and L, which represent parking gear, reverse gear, idle gear, forward gear, sports gear and low gear respectively.P parking gear Automatic transmission P stands for Park, which means parking in Chinese, so P gear is also called parking gear. When the vehicle is in P gear, it plays the role of fixing the vehicle.
N is neutral, temporarily stop and hang into this gear, stop the movement of the vehicle, and the power is not interrupted. For example, when waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. D is the forward gear (Drive), the most commonly used gear, which can be completed through throttle control when the gear needs to be raised and lowered.
r: It's a reverse gear. When it is in this gear, the reverse oil line of the hydraulic system will be turned on, so that the drive wheel will reverse and drive in reverse. N gear: it is an empty gear. When it is put into idle gear, the planetary gear system will idle and cannot output power. D: It's a forward gear.
Explanation of automatic transmission gears The gears of automatic transmission cars include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc. P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing.
1. For the illustration introduced in the automatic transmission gear, first of all, the shift lever of the automatic transmission is equivalent to the shift lever of the manual transmission. Generally, there are the following gears: P (parkating), R (reverse gear), N (idle gear), D (forward), S (or 2nd gear, that is, 2nd gear) and L (or 1st gear, that is, 1st gear). 2. When waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. L gear: This gear can be used when going downhill or uphill. It can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. 3. Automatic transmission carThe explanation of the gear is as follows: D gear: This is the most commonly used gear in automatic gear models. There are usually three types of DDD3, similar to the 1st and 2nd swings, 3rd and 4th gears, 5th and 6th gears of manual transmission. Different types of gears do not need to be controlled manually, and the car will move up and down according to the adjustment of the throttle. 4. The automatic transmission car gears include P gear, R gear, N gear, D gear, S gear and L gear. P is Parking. After the car stops, the P gear vehicle is to brake to prevent movement. Unlike N gear, P gear interrupts the power output. At present, some models will have independent P gear, which is called electronic braking, and the principle is the same. 5. Explanation of the gear of the automatic transmission car The gears of the automatic transmission car include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc.P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing. 1. There are three types of car gears: manual gear: generally 5 forward gears + one reverse gear. In the past, cars were all 4+1. Now some high-end cars, such as Mazda 6 manual, have 6 forward gears + one reverse gear. 2. Automatic car gears include P gear (parking gear), R gear (reverse gear), N gear (idle gear), D gear (forward gear), S gear (sports mode), and there is also a reverse gear button on the handle (used with R gear). 3. Car gears include P, R, N, D, 2 (or S), L (or 1), etc.1st gear: It is the L gear of some models, and it is also a steep slope gear. It is used when the car climbs uphill or has great resistance. When using the 1st gear, the speed of the car is low. 2nd gear: It is a forward shift gear, and the wave box can be changed between 1st and 2nd gears. 4. There are six gears on ordinary automatic transmission cars, from top to bottom: P, R, N, D, S, L. 5, P-Parking, parking gear, start gear. When parking is not used, the gear is here. At this time, the wheel is in a mechanical dead state, which can prevent slipping. R-Reverse, reverse gear. It is used when reversing. N-Neutral, neutral. Use this gear when parking temporarily (such as a red light). L gear: This gear can be used when going downhill or uphill, which can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. However, now most cars do not have L gear, and more M gear is used. P file: The word represented by P is: Park, which means "parking, parking" in Chinese. This gear, also known as "parking gear", is the gear that is hung when parking. R gear: The word represented by R is: Reverse, which means "reverse, opposite and reverse gear" in Chinese. R gear: reverse position. Move the shift lever to that position when reversing. After the car is completely stopped, the shift lever can be moved to this position.N gear: idle position. When the gear lever is moved to this position, the gearbox does not fit into any gear. After the shift lever is moved to this position, no power is transmitted to the wheels, and the braking function of the engine cannot be used. Car gears are divided into automatic transmission gears and manual transmission gears. The gears of automatic transmission are divided into P, R, N, D, 1 or L, etc. P(Parking): It is used for parking, which uses mechanical devices to lock the turning part of the car so that the car cannot move. What do so many gears on the automatic transmission mean? First, P block. The P gear is a parking gear. There is no such gear on the manual transmission car, so special attention should be paid to the use of this gear when driving an automatic transmission car. It is often a gear used only when the vehicle reaches the destination and the driver needs to get off the car. What are the gears of the car?
Car gear introduction
import data visualization-APP, download it now, new users will receive a novice gift pack.
D's full English name is drive, which represents the forward gear. When the gear is in this position, the car can move forward. At the same time, the automatic transmission under the gear will automatically change gear according to the speed and throttle, instead of stepping on the clutch like a handcar, which is much simpler and more convenient to operate. Generally, this gear is used for normal driving.
N gear is idle, which is used when the vehicle is stopped. R gear is a reverse gear, and you can only enter this gear when the car is completely stationary. P gear is a parking gear, which is used when the engine is turned off or the car is stationary. S is the second gear, which strengthens the power and enters the sports mode.
The letters on the gear of automatic transmission cars are P, R, N, D, S and L, which represent parking gear, reverse gear, idle gear, forward gear, sports gear and low gear respectively.P parking gear Automatic transmission P stands for Park, which means parking in Chinese, so P gear is also called parking gear. When the vehicle is in P gear, it plays the role of fixing the vehicle.
N is neutral, temporarily stop and hang into this gear, stop the movement of the vehicle, and the power is not interrupted. For example, when waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. D is the forward gear (Drive), the most commonly used gear, which can be completed through throttle control when the gear needs to be raised and lowered.
r: It's a reverse gear. When it is in this gear, the reverse oil line of the hydraulic system will be turned on, so that the drive wheel will reverse and drive in reverse. N gear: it is an empty gear. When it is put into idle gear, the planetary gear system will idle and cannot output power. D: It's a forward gear.
Explanation of automatic transmission gears The gears of automatic transmission cars include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc. P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing.
1. For the illustration introduced in the automatic transmission gear, first of all, the shift lever of the automatic transmission is equivalent to the shift lever of the manual transmission. Generally, there are the following gears: P (parkating), R (reverse gear), N (idle gear), D (forward), S (or 2nd gear, that is, 2nd gear) and L (or 1st gear, that is, 1st gear). 2. When waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. L gear: This gear can be used when going downhill or uphill. It can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. 3. Automatic transmission carThe explanation of the gear is as follows: D gear: This is the most commonly used gear in automatic gear models. There are usually three types of DDD3, similar to the 1st and 2nd swings, 3rd and 4th gears, 5th and 6th gears of manual transmission. Different types of gears do not need to be controlled manually, and the car will move up and down according to the adjustment of the throttle. 4. The automatic transmission car gears include P gear, R gear, N gear, D gear, S gear and L gear. P is Parking. After the car stops, the P gear vehicle is to brake to prevent movement. Unlike N gear, P gear interrupts the power output. At present, some models will have independent P gear, which is called electronic braking, and the principle is the same. 5. Explanation of the gear of the automatic transmission car The gears of the automatic transmission car include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc.P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing. 1. There are three types of car gears: manual gear: generally 5 forward gears + one reverse gear. In the past, cars were all 4+1. Now some high-end cars, such as Mazda 6 manual, have 6 forward gears + one reverse gear. 2. Automatic car gears include P gear (parking gear), R gear (reverse gear), N gear (idle gear), D gear (forward gear), S gear (sports mode), and there is also a reverse gear button on the handle (used with R gear). 3. Car gears include P, R, N, D, 2 (or S), L (or 1), etc.1st gear: It is the L gear of some models, and it is also a steep slope gear. It is used when the car climbs uphill or has great resistance. When using the 1st gear, the speed of the car is low. 2nd gear: It is a forward shift gear, and the wave box can be changed between 1st and 2nd gears. 4. There are six gears on ordinary automatic transmission cars, from top to bottom: P, R, N, D, S, L. 5, P-Parking, parking gear, start gear. When parking is not used, the gear is here. At this time, the wheel is in a mechanical dead state, which can prevent slipping. R-Reverse, reverse gear. It is used when reversing. N-Neutral, neutral. Use this gear when parking temporarily (such as a red light). L gear: This gear can be used when going downhill or uphill, which can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. However, now most cars do not have L gear, and more M gear is used. P file: The word represented by P is: Park, which means "parking, parking" in Chinese. This gear, also known as "parking gear", is the gear that is hung when parking. R gear: The word represented by R is: Reverse, which means "reverse, opposite and reverse gear" in Chinese. R gear: reverse position. Move the shift lever to that position when reversing. After the car is completely stopped, the shift lever can be moved to this position.N gear: idle position. When the gear lever is moved to this position, the gearbox does not fit into any gear. After the shift lever is moved to this position, no power is transmitted to the wheels, and the braking function of the engine cannot be used. Car gears are divided into automatic transmission gears and manual transmission gears. The gears of automatic transmission are divided into P, R, N, D, 1 or L, etc. P(Parking): It is used for parking, which uses mechanical devices to lock the turning part of the car so that the car cannot move. What do so many gears on the automatic transmission mean? First, P block. The P gear is a parking gear. There is no such gear on the manual transmission car, so special attention should be paid to the use of this gear when driving an automatic transmission car. It is often a gear used only when the vehicle reaches the destination and the driver needs to get off the car. What are the gears of the car?
Car gear introduction
Trade data for strategic sourcing
author: 2024-12-24 00:55How to understand re-export regulations
author: 2024-12-24 00:15Segmenting data by HS code and region
author: 2024-12-24 00:01Biotech imports HS code classification
author: 2024-12-24 02:11International trade law reference data
author: 2024-12-24 01:44Trade data integration with ERP systems
author: 2024-12-24 01:39
Segmenting data by HS code and region
539.46MB
Check
Surgical instruments HS code classification
681.24MB
Check
Australia HS code tariff insights
876.63MB
Check
International shipment tracking APIs
588.82MB
Check
Import restrictions by HS code category
353.68MB
Check
Global trade index visualization
133.75MB
Check
Trade data for renewable energy sector
939.44MB
Check
Real-time shipment data alerts
337.29MB
Check
HS code-driven demand planning
896.21MB
Check
Automotive supply chain transparency tools
265.29MB
Check
Global commodity price tracking
429.24MB
Check
How to manage complex supply chains with data
372.29MB
Check
Trade data-driven investment strategies
957.99MB
Check
Industry-specific tariff code reference
437.24MB
Check
Real-time freight capacity insights
858.77MB
Check
Meat and poultry HS code references
593.22MB
Check
HS code mapping to product categories
285.65MB
Check
Trade data analysis for small businesses
827.33MB
Check
HS code-based tariff reconciliation
176.58MB
Check
Agriculture trade data by HS code
732.83MB
Check
Best global trade intelligence tools
611.29MB
Check
HS code-based alternative sourcing strategies
933.48MB
Check
HS code-based customs broker RFPs
267.43MB
Check
Tariff impact simulation tools
258.21MB
Check
Import data for raw commodities
125.13MB
Check
Customs compliance scorecards
857.88MB
Check
trade data solutions
532.61MB
Check
Real-time trade data feeds
879.31MB
Check
Global trade data-driven forecasting
459.77MB
Check
Trade data for food and beverage industry
579.53MB
Check
European Union HS code verification
141.36MB
Check
How to interpret trade deficit data
552.82MB
Check
How to interpret global trade indicators
227.42MB
Check
Latin America export data visualization
299.11MB
Check
Global trade pattern recognition
364.72MB
Check
How to identify emerging market suppliers
568.68MB
Check
Scan to install
import data visualization to discover more
Netizen comments More
87 Free zone HS code compliance
2024-12-24 01:44 recommend
2745 How to meet import health standards
2024-12-24 00:32 recommend
2374 Actionable global trade insights
2024-12-24 00:13 recommend
1205 Biotech imports HS code classification
2024-12-24 00:04 recommend
638 HS code-based risk profiling for exporters
2024-12-23 23:50 recommend