HS code-based segment analysis for FMCG

List of the table of contents of this article:

• 1. Automatic Gear Introduction
• 2. Automatic transmissionExplanation of car gears
• 3,HS code-based segment analysis for FMCG Detailed introduction of the gear of automatic transmission car
• 4, Introduction to automatic transmission car gear

Introduction to the gear of the automatic transmission car

1. The explanation of the gear of the automatic transmission car is as follows: D gear: This is the most commonly used gear of the automatic gear model. There are usually three types of DDD3, which are similar to the 1 and 2 swings, 3 and 4 gears, 5 and 6 gears of the manual transmission. Different types of gears do not need to be manually controlled. System, the car will raise and lower the gear according to the adjustment of the trottle.

2. The automatic transmission gears are divided into 6 gears, namely P, R, N, D, S and L. P-parking gear. When you park the car, remember to hang the P gear. At this time, the car will stop braking and there will be no slippage.

3. D - Drive, the most commonly used gear, can be completed by throttle control when the gear needs to be raised and lowered. D1 (or L gear) and DD3 are equivalent to 1, 3, 5 and 6 gears of manual gear.

automatic transmission car gear explanation

1. Low-speed gear Low-speed gear is automatic transmission car The third gear is selected when climbing hills or passing through muddy roads. This gear will increase the engine speed, so that the vehicle can provide more torque and power output.

2. Automatic transmission car gears include P gear, R gear, N gear, D gear, S gear and L gear. P is Parking. After the car stops, the P gear vehicle is to brake to prevent movement. Unlike N gear, P gear interrupts the power output. At present, some models will have independent P gear, which is called electronic braking, and the principle is the same.

3. The explanation of the gear of the automatic transmission car is as follows: D gear: This is the most commonly used gear of the automatic transmission model. There are usually three types of DDD3, which are similar to the 1 and 2 swings, 3 and 4 gears, 5 and 6 gears of manual transmission. Different types of gears do not need to be controlled manually, and the car will adjust according to the accelerator. Up and down gear.

4. When waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. L gear: this gearThe gear can be used when going downhill or uphill. It can limit the gear of the car to the lowest gear. It can make the car use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger.

5. What are the gears of the automatic transmission car? For the illustrations introduced in the gear of the automatic transmission car, first of all, the shift lever of the automatic transmission is equivalent to the shift lever of the manual transmission. Generally, there are the following gears: P (parkating), R (reverse gear), N (idle gear), D (forward), S (or 2nd gear, that is, 2nd gear) and L (or 1st gear, that is, 1st gear).

Detailed introduction of the gear of automatic transmission car

Low-speed gear is the third gear of automatic transmission, which is selected when climbing hills or passing through muddy roads.This gear will increase the engine speed, so that the vehicle can provide more torque and power output. Low gears are often used to pass steeper ramps or drive vehicles out of traps or muddy areas.

The explanation of the automatic transmission car gear is as follows: D gear: This is the most commonly used gear of automatic gear models. There are usually three types of DDD3, similar to the 1 and 2 swing, 3 and 4 gears, 5 and 6 gears of manual transmission. Different types of gears do not need to be controlled manually, and the car will rise and fall according to the adjustment of the throttle. File.

There are usually 6-7 gears in automatic transmission cars, which are D gear, P gear, R gear, N gear, S gear and L gear, while M gear is unique to manual and automatic integrated models, and not every automatic transmission car has it.

The gears of automatic transmission are divided into: P gear, R gear, N gear, D gear and L gear.P gear: How to use the parking gear When the vehicle wants to stop for a long time, it needs to be changed to P gear. In this way, the wheel is in a mechanical dead state, which can ensure that the vehicle cannot move in a stationary state.

The automatic car gears are P, R, N, D and S gears respectively.

Introduction to automatic transmission car gear

Low-speed gear is the third gear of automatic transmission car, which is selected when climbing hills or passing through muddy roads. This gear will increase the engine speed, so that the vehicle can provide more torque and power output. Low gears are often used to pass steeper ramps or drive vehicles out of traps or muddy areas.

The explanation of the automatic transmission gear is as follows: D gear: This is the most automatic gear modelThe commonly used gears usually have three types of DDD3, which are similar to the 1st and 2nd swings, 3rd and 4th gears, 5th and 6th gears of manual transmissions. Different types of gears do not need to be controlled manually, and the car will move up and down according to the adjustment of the throttle.

D - Drive, the most commonly used gear, can be completed by throttle control when the gear needs to be raised and lowered. D1 (or L gear) and DD3 are equivalent to 1, 3, 5 and 6 gears of manual gear.

Generally, there are five gears of automatic car gearboxes: P, R, N, D and S. P is parking, R is reversing, N is idle, D is forward, and S is sports mode.

The gears of automatic transmission are divided into: P gear, R gear, N gear, D gear and L gear. P gear: How to use the parking gear When the vehicle wants to stop for a long time, it needs to be changed to P gear.In this way, the wheel is in a mechanical dead state, which can ensure that the vehicle cannot move in a stationary state.