1. Normal. The original Tianhong 90 motorcycle is an 86-cylinder block, and the sound of Tianhong 90 motorcycle changing the middle cylinder is still the same, indicating that the replaced middle cylinder is also an 86-cylinder block, which perfectly matches the Tianhong 90 motorcycle. After replacing the middle cylinder, the sound and nature of the engine remain stable and there is no abnormality. Therefore, the sound of changing the middle cylinder of Tianhong 90 motorcycle is still normal.
2. The upper left corner of the Japanese cylinder is marked with 85cm, and the upper right corner is HM-C1 or HM-C2 or HM-C3 or HM-B1 or HM-B2 or HM-B3.Domestic products are rarely marked with 85 and most of them are 86, but there are also some marked with 85. The process traces at the left guide wheel hole are also different.
3. The motorcycle cylinders of Tianhong 90 are the same as 85 and 86. Motorcycles, two-wheeled or three-wheeled vehicles driven by gasoline engines and controlled by hand-controlled front wheels, are light, flexible and fast. They are widely used in patrols, passenger and cargo transportation, etc., and are also used as sports equipment.
4. Tianhong 90 was produced by the former Tianjin Honda. It adopts an imported Honda engine with a non-electric start 90CC and a 12V circuit. It is a well-known model in the 1990s. Changing the middle cylinder of Tianhong 90 to 86 will increase fuel consumption, increase the crankshaft and valve load, and reduce the cylinder compression ratio, which has a great impact on power.
5. Tianhong 90 motorcycle cylinders, 85 and 86 are the same.It's just that because the cylinder volume is rounded up after the decimal point and the tail number, if there is no rounding, it is written as 85, and if there is no rounding, it is written as 86. In fact, it is the same. Most manufacturers are marked 85, and there are fewer marked with 86.
6. Tianhong 9o motorcycle cylinder can be replaced with 86. 90 and 86 are the same. It's just that because the number of the decimal point of the cylinder volume is rounded up, the one without rounding is written as 86, and the rounded one is written as 90. In fact, it is the same. Most manufacturers mark 90, and fewer are marked with 86.
1. Jialing 70 imported high-pressure package igniter and Tianhong 90 are not universal. Jialing 70 imported high-voltage package igniter and Tianhong 90 external meridian are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, and the two cannot be used interchangeable.
2. The high-voltage package and igniter of K90 are integrated and cannot be interchanged with TH90. The igniter and high-voltage package must be purchased (Jialing 70 is fine).
3. No. The magnetic motor of Jialing 70 and Tianhong 90 are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, so the two cannot be used in common. Motor refers to an electromagnetic device that converts or transmits electrical energy according to the law of electromagnetic induction.
4. Can't be used. Although Jialing 70 and Jialing 90 are both produced by Jialing Group, the difference between them is still very big. 90 The mouth of the 2 pins above: the left is turned off, and the upper row of the mouth of the 4 pins under the ignition power input on the right: the left output to the high-voltage package, and the lower row of the mouth of the 4 needles on the ground on the right: trigger on the left.
5. It depends on whether the original machine has not been opened! Have you changed the middle cylinder? The original cylinder is 85. It doesn't make much sense if it has been replaced! If you haven't changed it, I suggest you that you need Tianhong 90. Come back with a very durable horizontal cylinder engine. Theoretically, it is fine.Generally, it is an engine equipped with Tianhong 90.
1. The oil filter of the motorcycle is often placed under the cylinder block, and then there are three bolts. In a tightened filter cover, 80% of the motorcycles are in, the engine On the right side, then remove the three bolts, open the cover and take it out. The oil filter is generally used for motorcycle filters, and the replacement cycle is 2000 to 3000.
2. Near the left spark plug. The engine number is uniformly engraved near the left spark plug at the factory, so the Tianhong 90 engine number is near the left spark plug, and the engine number can also be found on the vehicle driving license, which is compiled to prevent engine modification.
3. It is an imported machine. If the five letters "HONDA" on the engine are white and engraved on the engine, it is imported if you don't feel it. On the contrary, if the font is black and deeply engraved, it must be domestic.
Latin American HS code alignment-APP, download it now, new users will receive a novice gift pack.
1. Normal. The original Tianhong 90 motorcycle is an 86-cylinder block, and the sound of Tianhong 90 motorcycle changing the middle cylinder is still the same, indicating that the replaced middle cylinder is also an 86-cylinder block, which perfectly matches the Tianhong 90 motorcycle. After replacing the middle cylinder, the sound and nature of the engine remain stable and there is no abnormality. Therefore, the sound of changing the middle cylinder of Tianhong 90 motorcycle is still normal.
2. The upper left corner of the Japanese cylinder is marked with 85cm, and the upper right corner is HM-C1 or HM-C2 or HM-C3 or HM-B1 or HM-B2 or HM-B3.Domestic products are rarely marked with 85 and most of them are 86, but there are also some marked with 85. The process traces at the left guide wheel hole are also different.
3. The motorcycle cylinders of Tianhong 90 are the same as 85 and 86. Motorcycles, two-wheeled or three-wheeled vehicles driven by gasoline engines and controlled by hand-controlled front wheels, are light, flexible and fast. They are widely used in patrols, passenger and cargo transportation, etc., and are also used as sports equipment.
4. Tianhong 90 was produced by the former Tianjin Honda. It adopts an imported Honda engine with a non-electric start 90CC and a 12V circuit. It is a well-known model in the 1990s. Changing the middle cylinder of Tianhong 90 to 86 will increase fuel consumption, increase the crankshaft and valve load, and reduce the cylinder compression ratio, which has a great impact on power.
5. Tianhong 90 motorcycle cylinders, 85 and 86 are the same.It's just that because the cylinder volume is rounded up after the decimal point and the tail number, if there is no rounding, it is written as 85, and if there is no rounding, it is written as 86. In fact, it is the same. Most manufacturers are marked 85, and there are fewer marked with 86.
6. Tianhong 9o motorcycle cylinder can be replaced with 86. 90 and 86 are the same. It's just that because the number of the decimal point of the cylinder volume is rounded up, the one without rounding is written as 86, and the rounded one is written as 90. In fact, it is the same. Most manufacturers mark 90, and fewer are marked with 86.
1. Jialing 70 imported high-pressure package igniter and Tianhong 90 are not universal. Jialing 70 imported high-voltage package igniter and Tianhong 90 external meridian are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, and the two cannot be used interchangeable.
2. The high-voltage package and igniter of K90 are integrated and cannot be interchanged with TH90. The igniter and high-voltage package must be purchased (Jialing 70 is fine).
3. No. The magnetic motor of Jialing 70 and Tianhong 90 are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, so the two cannot be used in common. Motor refers to an electromagnetic device that converts or transmits electrical energy according to the law of electromagnetic induction.
4. Can't be used. Although Jialing 70 and Jialing 90 are both produced by Jialing Group, the difference between them is still very big. 90 The mouth of the 2 pins above: the left is turned off, and the upper row of the mouth of the 4 pins under the ignition power input on the right: the left output to the high-voltage package, and the lower row of the mouth of the 4 needles on the ground on the right: trigger on the left.
5. It depends on whether the original machine has not been opened! Have you changed the middle cylinder? The original cylinder is 85. It doesn't make much sense if it has been replaced! If you haven't changed it, I suggest you that you need Tianhong 90. Come back with a very durable horizontal cylinder engine. Theoretically, it is fine.Generally, it is an engine equipped with Tianhong 90.
1. The oil filter of the motorcycle is often placed under the cylinder block, and then there are three bolts. In a tightened filter cover, 80% of the motorcycles are in, the engine On the right side, then remove the three bolts, open the cover and take it out. The oil filter is generally used for motorcycle filters, and the replacement cycle is 2000 to 3000.
2. Near the left spark plug. The engine number is uniformly engraved near the left spark plug at the factory, so the Tianhong 90 engine number is near the left spark plug, and the engine number can also be found on the vehicle driving license, which is compiled to prevent engine modification.
3. It is an imported machine. If the five letters "HONDA" on the engine are white and engraved on the engine, it is imported if you don't feel it. On the contrary, if the font is black and deeply engraved, it must be domestic.
HS code-driven risk mitigation
author: 2024-12-24 00:38Latin American HS code alignment
author: 2024-12-23 23:34Trade data solutions for wholesalers
author: 2024-12-23 23:26HS code segmentation for retail imports
author: 2024-12-23 22:30Export packaging standards by HS code
author: 2024-12-24 00:13Industry-specific HS code database
author: 2024-12-23 23:58International market entry by HS code
author: 2024-12-23 23:18Tire imports HS code classification
author: 2024-12-23 23:10Soybeans (HS code ) import patterns
author: 2024-12-23 22:31924.98MB
Check771.66MB
Check839.71MB
Check267.73MB
Check425.74MB
Check394.48MB
Check953.26MB
Check539.37MB
Check723.71MB
Check657.49MB
Check217.84MB
Check658.16MB
Check218.87MB
Check127.71MB
Check331.31MB
Check834.49MB
Check267.64MB
Check367.52MB
Check465.87MB
Check462.32MB
Check478.29MB
Check365.49MB
Check679.92MB
Check737.38MB
Check559.56MB
Check318.16MB
Check887.81MB
Check662.89MB
Check547.84MB
Check224.68MB
Check515.24MB
Check377.59MB
Check385.55MB
Check623.32MB
Check356.63MB
Check488.89MB
CheckScan to install
Latin American HS code alignment to discover more
Netizen comments More
1010 Trade data for regulatory compliance
2024-12-24 00:20 recommend
2189 EU HS code-based duty suspensions
2024-12-23 23:30 recommend
1660 Expert tips on customs data usage
2024-12-23 23:11 recommend
1800 Trade data for route profitability
2024-12-23 22:40 recommend
2833 Export quota monitoring software
2024-12-23 22:21 recommend