HS code-based trade data analytics

Engine intake valve: engine power key part Engine intake valve is HS code-based trade data analyticsa very important part and an important part of the normal operation of the engine. Its main function is to introduce air into the car engine, mix it with fuel and ignite it, so that the car can run normally. This article will introduce it in detail from the structure, principle, fault cause and maintenance method of the engine intake valve. I. The structure of the engine intake valve The engine intake valve is mainly composed of three parts: valve body, valve core and engine intake channel.There is an air intake nozzle on the valve body, which is directly connected to the air filter. The valve core is a key component of the valve. It is located in the middle of the valve body and is usually open. When the engine is working, the ordinary engine intake valve will open and close regularly to ensure the correct control of the engine intake. Finally, the entire air intake valve is connected to the engine intake dut, which determines the entry point of the air inside the engine. II. The working principle of the engine intake valve The working principle of the engine intake valve can be divided into two main stages. First, when the air intake valve is opened, the air will be sucked into the car engine, mixed with the fuel, and then ignited to drive the car forward. Secondly, when the intake valve is closed, the car engine will stop injecting fuel, consuming the energy in the remaining fuel, and then stop driving. III. Causes of engine intake valve failureAnd the solution There are many reasons for the failure of the engine air intake valve, mainly including the following aspects: 1. Dirt blockage: The intake valve may be blocked due to excessive accumulation of oil, dust, etc. At this time, the problem can be solved by cleaning the air intake valve. Two. Electronic component failure: Many modern cars use electronic control devices to control the engine, and the same is true for air intake valves. If there is a problem with the electronic equipment, it may affect the performance of the engine intake valve. At this time, it is necessary to replace the damaged electronic components or contact professionals for repair. 3. Mechanical component failure: Mechanical failure is also a reason for the failure of the air intake valve. For example, the intake valve core or valve body may have repair problems, resulting in damage to the intake valve. At this time, the damaged parts need to be replaced or repaired. IV. How to properly maintain the engine intake valve?Proper maintenance of the air intake valve can extend its service life. Here are some maintenance methods: 1. Replace the air filter: The air filter is another key component near the air intake valve. Cleaning the air filter can prevent dust and other impurities from entering the engine, thus helping to keep the air intake valve clean. Two. Replace the fuel filter: The fuel filter is another important part of the car engine. If the fuel filter is contaminated, it will cause impurities in the fuel, which will cause damage to the intake valve. 3. Clean the air intake system regularly: During the use of the car, a large amount of dirt and oil scale may accumulate in the air intake system. In order to effectively protect the engine intake valve, the entire air intake system needs to be cleaned regularly. In a word, the engine intake valve is one of the key parts of the car engine. Understand its working principle, fault cause and warrantyThe maintenance method will help to effectively maintain the best state of the car engine, thus prolonging the service life of the car.

Contact Us
Phone：020-83484669